The RF41 is an OEM laser module to integrate contact-free laser distance measurement capabilities into existing measurement equipment.It is an optoelectronic distance measuring device for industrial applications with an analogue interface. The OEM laser module RF41 distinguishes itself through high precision as well as high independence from the surface of the measuring object. The red, visible laser
beam allows for easy alignment. Compared to the industrial laser distance measurement gauge LDM41A only the housing is omitted.
LDM51A-x Lumos
The LDM51A-x Lumos is a hardier version of the LDM51. The LDM51A-x Lumos provides non-contact measurements up to 100m with no additional reflectors required. Fast measurements are also possible because of the high measuring frequency (100 Hz). The LDM51A-x has a stainless steel housing with water cooling capabilities, which was designed to withstand harsher conditions, such as outdoor areas, steel plants, paper mills, etc.
VLM 502: Velocity & Length Measurement
Based on the design of the VLM 500, the VLM 502 boasts many of the same benefits and features as its predecessor. Both the VLM 500 and VLM 502 utilize a CCD Sensor to accurately measure. Speed is measured by using the spacial filter principle (grid modulation), and length is measured by integration over time (light reflection). The VLM 502 enables non-contact speed and length measurements within limited space requirements, due to its small gauge head. For more information, please refer to the data sheet or contact us with any questions.
CROMLAVIEW® CR500 Color Sensor
As with the other color sensors of the CROMLAVIEW® family the CR500 processes colors perceptually (i.e. according to human color perception) and assesses color distances with the precision of the human eye. The CR500 can be parameterized by means of RS232 or USB interfaces. The free software CR-Tool – CR500 facilitates the parameterization of the color sensor and the visualization of color values. A distance monitor supports the adjustment of the fiber head. Besides that, the color sensor can also be operated using the buttons. Therefore the distance monitoring can be performed by means of 12 LEDs. As all the other CROMLAVIEW® color sensors the CR500 is equipped with CROMLASTAB®-technology, which protects from temperature- and aging drifts and ensures with this method a reliable operation over the whole lifetime cycle. The sensor contains a built-in white light source clocked with a frequency of up to 2 kHz. Sampling takes place in both, the light and the dark phase. Additive ambient light cannot change the difference between the light and dark phase, so that the sensor is independent from ambient light.
LDM51 Lumos Laser Distance Measurement
The brand new measurement gauge LDM51 Lumos measures contactless the distance between itself and nearly every surface and material. Up to a distance of 100 m no additional reflectors are required for measuring. The maximum distance exceeds the range of 500 m. Due to the high measuring frequency of 100 Hz also fast movements of the target can be captured.
The LDM51 Lumos operates with a modulated visible laser with low beam divergence. Newly developed algorithms and most modern technologies of the opto-electronic signal processing allow a save, highly precise and fast distance measurements that can be applied in almost all areas of machinery and plant engineering.
Other application examples are level measurement, detection of geometric dimensions like length, width or thickness and position measurement. While developing the LDM51 Lumos there was paid particular attention to the operation in outdoor areas with high influence of constant light by solar radiation and high temperatures. By its robust aluminum housing and the optional heating the LDM51 Lumos is prepared for safe use in harsh surrounding conditions.
