The Hydrobar “I” is an “intelligent”, free adjustable, hydrostatic level transmitter with cable (IP68) for level measurement in water & wastewater, pulp, slurry, chemicals etc. The Hydrobar “I” has active temperature compensation and a strong (laser welded) diaphragm which results in a perfect long term stability.
Hydrobar S – Submersible Level Transmitter
The Hydrobar “S” is a microprocessor based submersible level transmitter for top mounting, with a local display and easy adjustment by three push buttons.
Besides the level, the display can also indicate the process temperature. A tank linearisation and a 4-20 mA current simulation can be done.
The Hydrobar „S“ is available with HART Protocol and can be adjusted locally and by HHT or PC with special Klay software. Mounting can be done by wall mounting bracket, Flange or a threaded Connection G1½“or G2“).
Hydrobar Submersible Level Transmitter
The “Hydrobar” series are submersible level transmitters with a cable or SS tube extension, to measure the level in waterworks, deep wells, underground tanks, concrete bunkers, etc. The “Hydrobar” transmitters are available as fixed range (type FR units), or with adjustable zero and span. All transmitters are fully temperature compensated, and are equiped with strong flush mounted diaphragms who are laser welded, this results in a perfect long term stability.
Series 4000 Pressure & Level Transmitter
The series 4000 is a complete line of high-end Intelligent pressure and level transmitters with a Stainless steel electronics housing. The calibration / programming can be done very easy without testpressure by using the Unique One Touch programming button together with the Graphic display with backlight. The graphic display can indicate a number of chosen engineering units including the process temperature and the actual value in a bargraph. Damping times can be adjusted and a 4-20 mA current simulation can be performed. Various tankshapes for different tank linearisations are available. The series 4000 is fully temperature compensated and over 40 different process connections with flush diaphragm are available. Options include HART® protocol and ATEX Ex ia approval (pending).
FLX Sanitary Switch
The HiTECH FLX family of Conductivity Level Switches are an ALL stainless liquid level switch, based on the conductance technology, measuring between the sensor tip and a ground reference. Designed to be non-clogging and well suited for clean-in-place service, they are the ideal choice for the beverage, food, biotech, pharmaceutical, and chemical industries. To satisfy a broad range of application requirements, a variety of process connections and wetted materials are available.
